Canon imagePROGRAF iPF5100 User Manual page 99

Important
•
Always specify the same type and size of paper in the printer menu and printer driver.
If the type and size do not match, an error message may be displayed and printing may not be
possible.
•
PaprTyp Mismatch (→P.735)
•
PaprSiz Mismatch (→P.736)
•
Paper Mismatch (→P.735)
8.
Start printing.
•
Printing from Windows (→P.89)
•
Printing from Mac OS X (→P.90)
•
Printing from Mac OS 9 (→P.92)
Note
•
Steps 5 and 6 are not required, if a barcode has been printed on the roll and you have activated
automatic detection of the remaining roll paper. The paper type and amount of paper left are
automatically detected.
•
Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading
edge.
When printing quality is most important, we recommend setting TrimEdge Reload to On so that the
paper edge is automatically cut before printing.
•
For details on supported sizes and types of the roll that can be loaded, see Paper Sizes (→P.112) or
the Paper Reference Guide. (→P.107)
•
Clean the platen after you have used up a roll. (→P.670)
•
When a roll has been advanced, do not pull it out by force. This will prevent the paper from being
advanced.
If you accidentally pull out the paper, hold the Stop/Eject button to enable feeding again.
(→P.122)
Printing procedure
Basic Printing Workow 85