Interface Setup - Canon imagePROGRAF iPF820 User Manual

Hide thumbs Also See for imagePROGRAF iPF820:
Table of Contents

Advertisement

Interface Setup

EOP Timer
TCP/IP
IP Mode
Protocol
IP Setting
NetWare
NetWare
Frame Type
Print Service
AppleTalk
Ethernet
Auto Detect
Driver
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Ext. Interface
Return
Defaults
Setting Item
DHCP
BOOTP
RARP
IP Address
Subnet Mask
Default G/W
Description, Instructions
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
Choose whether the printer IP address is
congured automatically or a static IP address
is entered manually.
Specify the protocol used to congure the IP
address automatically.
Specify the printer network information when
using a static IP address.
Enter the IP address assigned to the printer, as
well as the network subnet mask and default
gateway.
Specify the NetWare protocol. To apply your
changes, choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol.
To apply your changes, choose Register
Setting.
Specify the communication method. To apply
your changes, choose Register Setting.
Choose On for automatic conguration of the
LAN communication protocol. Choose Off
to apply Comm.Mode and Ethernet Type
settings.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are
supported over the LAN.
Displays the MAC address.
Specify whether or not to use the optional
expansion interface when it is installed.
Return Defaults/Execute? is displayed if you
press the ▼ button. Choose OK to restore the
network settings to the default values.
Control Panel
Printer Parts 61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf820 proIpf820

Table of Contents