Loading And Printing On Rolls - Canon imagePROGRAF iPF5100 User Manual

Printing procedure

Loading and Printing on Rolls

These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
•
If a sheet is loaded in the Tray, remove it before this procedure. (→P.146)
•
Before printing banners or other large-format documents, spread a clean cloth or paper over the oor.
Long sheets that touch the oor after printing may become dirty.
•
If you will wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and print a cut line instead. (→P.130)
1.
Turn the printer on. (→P.20)
2.
Select roll paper (a) as the paper source. (→P.114)
82 Basic Printing Workow