Canon imagePROGRAF iPF5100 User Manual page 726

Clearing jammed paper
Clearing Jammed Paper (Paper Feed Slot)
Follow these steps to remove any scraps left in the Paper Feed Slot after you clear jammed sheets or
roll paper.
1.
Press the Feeder Selection button to activate the Paper Tray lamp.
2.
Press ◄ or ► to select POP Board, and then press the OK button.
The setting is updated, and an equals sign "=" is displayed at left.
3.
Press ◄ or ► to select ISO A2, and then press OK.
The setting is updated, and an equals sign "=" is displayed at left.
A conrmation message is displayed notifying you that the printer is changing the media source.
4.
After the following message is displayed, press the OK button.
5.
After the following message is displayed, open the Top Cover.
6.
Fold an A4 sheet lengthwise four times and insert it through the gap of the Back Cover. Push the
scrap out toward the Platen.
7.
Remove the scrap when it is pushed out onto the Platen.
8.
If any scraps remain inside the Paper Feed Slot, repeat steps 6 and 7.
9.
Close the Top Cover.
10.
Turn the printer off. (→P.20)
712 Troubleshooting
Manual Pap.Type
= POP Board
Manual Pap.Size
= ISO A2
Please Wait..
Chk Back Space
Press OK
Open UpperCover