Canon imagePROGRAF iPF5100 User Manual page 58

Control Panel
First Level
*1: Displayed if a roll is loaded.
*2: Displayed if the Roll Feed Unit is installed.
*3: Displayed if Chk Remain.Roll is On.
*4: Displayed if IP Mode is Automatic.
*5: Only these menus are displayed during printing.
*6: For information on the types of paper Media Conguration Tool the printer supports, refer to the Paper
Reference Guide. (→P.107) The paper type setting in the printer driver and related software (as well as
on the Control Panel ) is updated when you install the Media Conguration Tool from the User Software
CD-ROM or if you change paper information by using the . See the Media Conguration Tool Guide
(Windows) or Media Conguration Tool Guide (Macintosh).
*7: Available only if Auto Detect is Off.
*8: Available only if NetWare is On.
*9: Follows the setting in Date Format.
*10: Displayed if paper is loaded in the tray.
*11: This menu is only displayed during printing.
*12: Not displayed if a roll or a sheet has been fed.
44 Printer Parts
Second Level Third Level
Counter Cut Count
Fourth Level Fifth Level
Job Status OK
CANCELED
Print Start Time yyyy/mm/dd
hh:mm
Print End Time yyyy/mm/dd
hh:mm
Print Time xxx sec.
Print Size xxxxxxxx
sq.mm
Media Type
Interface USB
Network
IEEE1394
Ink xx.x ml
Consumption
Sixth Level