Activating Appletalk On The Printer - Canon imagePROGRAF iPF5100 User Manual

Network Setting (Macintosh)
Conguring the Destination for AppleTalk Network
(Macintosh)
To print over an AppleTalk network, activate the AppleTalk protocol and congure the destination as follows.

Activating AppleTalk on the printer

Important
•
By factory default, the AppleTalk protocol is disabled on the printer.
1.
Press the Menu button to display MAIN MENU.
2.
Press ◄ or ► to select Interface Setup, and then press ▼.
3.
Press ◄ or ► to select AppleTalk, and then press ▼.
4.
Press ◄ or ► to select On and then press OK.
The setting is updated, and an equals sign "=" is displayed at left.
5.
Press the Online button to bring the printer online.
If any of the settings is changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
•
By using RemoteUI, you can also specify the object name used by AppleTalk, as well as the printer
zone name.
For details on RemoteUI, see "Using RemoteUI". (→P.580)
Important
•
Be sure to complete step 5. This will activate the values you have entered.
600 Network Setting
MAIN MENU
Interface Setup ↓
Interface Setup
AppleTalk ↓
AppleTalk
= On