Canon imagePROGRAF iPF5100 User Manual page 147

Paper Cutting (to have the roll cut at your specied position)
1.
If the printer stops operating after printing, press the Online button.
The printer goes ofine, and the following screen is displayed.
2.
Press ▲ or ▼ to feed the roll paper to the position for cutting.
3.
Select Yes as the Paper Cut in the printer menu, and then press OK.
The setting is updated, and an equals sign "=" is displayed at left.
After the roll paper is cut, it is rewound automatically.
Caution
•
If paper would be short when cut at a particular position, the roll may automatically be advanced in
some cases before cutting.
Ofine
FeedPaper ↑↓
Paper Cut
= Yes
Handling rolls
Handling Paper 133