Setup] Menu ([Interface] Options) - Canon i-SENSYS LBP6670dn User Manual

[Setup] Menu ([Interface] Options)

NOTE
Table description
Bold values in the table indicate the default settings.
After changing the setting items with "*1", cycle the power of the printer or perform a hard reset to make the
settings effective.
The setting items or setting values with "*2" may not be displayed depending on the availability of the optional
accessories and other settings.
Setting Item
[Interface Selection]
[USB]
[Network]
[USB Storage
*2
Device]
[Timeout]
[Connection
*1
Recog.]
[Extended RX
*1*2
Buffer]
Downloaded from ManualsPrinter.com Manuals
Setting Value
*1
[Use USB
Connection]:
[Off], [On]
[Recog.
USB
Connect.]:
[Mode 1],
[Mode 2]
[Off], [On]
[MEAP Driver]:
[Off], [On]
[Timeout]:
[Off], [On]
[Timeout
*2
Time] : 5
to 15 to
300
seconds
[Off], [On]
[Off], [On]
Specifies the settings for the interfaces used for communication with the
computer or other device.
[Use USB Connection]
Specifies whether to use the USB interface.
[Recog. USB Connect.]
Switches the USB connection recognition mode. Normally, set it as [Mode
1].
Specifies whether to use the network interface.
Specifies the setting for the device driver when using USB memory
devices.
Specifies the function to finish a job automatically.
When you print using the standard network, you may not obtain proper
printout results. (Unreadable characters are printed, overlay printing fails,
etc.) In this case, specify [Off] for this item.
If this item is set to [On], the memory capacity of the printer's receive
buffer that receives the data is increased. You can speed up the time the
computer exits when you send a large amount of data or complicated data
from the computer.
Setting
04L9-0AH