Canon imagePROGRAF iPF5100 User Manual page 635

7.
Examine test pattern B for band adjustment. After you determine the pattern in which streaks are
least noticeable, press ◄ or ► to choose the pattern number, and then press the OK button.
The feed amount is adjusted, and the printer goes online.
If printed documents are still affected by uneven contrast or banding in different colors at regular
intervals after this adjustment, you can adjust the feed amount during printing. (→P.621)
Adjusting the feed amount during printing
If, during printing, the contrast is uneven sideways across the paper or banding in different colors appears
every 40 mm (1.6 in) or so, try adjusting the feed amount as follows. The results of adjustment are applied to
printing in progress, enabling you to check the results immediately. However, note that because printing is
paused, colors may be slightly different.
1.
Press the Online button to pause printing.
2.
Press the Menu button to display Menu Durng Prtng.
3.
Press ◄ or ► to select Fine Band Adj., and then press the OK button.
Adj.Setting
=11
MAIN MENU
Fine Band Adj. ↓
Adjusting the feed amount
Maintenance 621