Roll Paper Cannot Be Inserted Into The Paper Feed Slot; Cannot Load Sheets In The Tray - Canon imagePROGRAF iPF5100 User Manual

Other problems

Roll paper cannot be inserted into the Paper Feed Slot

The roll paper is warped.
The roll was pulled out by force when it had been
advanced before printing, and this action closed the
Paper Feed Slot .

Cannot load sheets in the tray

The paper source selection is incorrect.
The Front Tray Guides are in the Front Paper Feed Slot.
Paper cannot be ejected because the roll was
advanced when the Front Tray Guides were in the
Front Paper Feed Slot .
726 Troubleshooting
Cause
Cause
Cause
Corrective Action
Straighten out curls and reload the roll.
Hold down the Stop/Eject button for a while and
reload the roll.
Corrective Action
Press the Feeder Selection button to activate the
Paper Tray lamp .
Corrective Action
On the Control Panel , momentarily select POP
Board on the screen for selection of the media type.
The Front Paper Feed Slot will rise, so lift the Vertical
Paper Guides and store them toward the front.