Power On / Again - Canon imagePROGRAF iPF5100 User Manual

Other Messages

Power On / Again

Fastening tape or the Belt Stopper has not been
removed inside the Top Cover .
There is a paper jam.
There is a problem with the printer.
760 Error Message
Cause Corrective Action
Follow the steps below, referring to the Quick Start
Guide as needed.
1.
Turn the printer off.
2.
Open the Top Cover and remove the tape or Belt
Stopper .
3.
Turn the printer on.
Follow these steps.
1.
Turn the printer off.
2.
Remove the jammed paper.
(→P.173)
(→P.138)
(→P.179)
3.
Turn the printer on.
4.
Reload the paper.
(→P.80)
(→P.82)
(→P.86)
Turn off the printer and wait for three seconds or
more before restoring the power.
If the message is still displayed after this, write down
the error code and message, turn off the printer, and
contact the Canon dealer for assistance.