Other Maintenance
9.
After Completed! Turn Power Off!! is shown on the Display Screen, turn off the printer.
Important
•
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the Ink Tanks,
wait until the printer comes online, and follow this procedure again.
10.
Disconnect the power cord and interface cable.
11.
Open the Top Cover.
12.
Grasp the Belt, insert it between the Belt Stopper, and afx the Belt Stopper to the Carriage Shaft.
682 Maintenance
Completed!
Turn Power Off!!