Canon imagePROGRAF iPF5100 User Manual page 93

Note
•
Printable area: The area that can be printed.
•
Guaranteed Print Area: We recommend printing within this area.
•
To print so that your original matches the print area exactly, use an oversized paper size that includes
the required margin. (→P.305)
•
You can choose a bottom margin of 3 mm or 23 mm when printing from the Top Paper Feed Slot.
In the printer driver, choosing Manual in Media Source sets the bottom margin at 23 mm. On the
other hand, choosing Manual (3mm margins) in Media Source sets the bottom margin at 3 mm,
which provides a larger area for printing.
However, the option Manual (3mm margins) is not available with the following paper.
•
Fine Art Photo Paper
•
Fine Art Heavyweight Photo Paper
•
Fine Art Textured Paper
•
The types of paper listed above may be updated, in some cases.
For details on paper types, see the Paper Reference Guide. (→P.107)
•
If you set the bottom margin at 3 mm, images in the bottom margin may be distorted.
In this case, choose Manual in Media Source to set the bottom margin at 23 mm.
Rolls
•
Printable Area:
A margin of 3 mm (0.12 in) on all sides is required. A margin of 3 mm (0.12 in) on the top, bottom, and
both sides is required. During borderless printing, the margin on all sides is 0 mm. For information on
paper compatible with borderless printing, see the Paper Reference Guide. (→P.107)
•
Recommended print area:
A margin of 20 mm (0.79 in) on top, 5 mm (0.20 in) on bottom, and 5 mm (0.20 in) on left and right
sides is required.
Note
•
Printable area: The area that can be printed.
•
Guaranteed Print Area: We recommend printing within this area.
•
To print so that your original matches the print area exactly, use an oversized paper size that includes
the required margin. (→P.305)
Printer Specications
Printer Parts 79