Canon imagePROGRAF iPF5100 User Manual page 64

Control Panel
(The paper type is
displayed here.) (*1)
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide.
(→P.107) The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install Media Conguration Tool from the User Software CD-ROM or if
you change paper information by using Media Conguration Tool.
50 Printer Parts
Setting Item
Cutting Mode
Bordless Margin
CutDustReduct.
Nr End Sht Mrgn
Tray Source
Return Defaults
Description, Instructions
Specify if the Cutter Unit is used for cutting.
Choose Automatic to have roll paper cut automatically after
printing. If you choose Eject , the paper will not be cut after
printing. Instead, a line will be printed at the cut position.
Choose On for margin adjustment during borderless printing.
Choose On to reduce the amount of debris generated when
cutting lm and similar media by printing a line at the cut
position. This option reduces the amount of debris given off
after cutting. (→P.134)
Specify a margin at the leading edge of sheets to ensure
better printing quality at the leading edge.
Note that if you choose 3mm , it may lower the printing quality
at the leading edge and affect feeding accuracy. The printed
surface may be scratched, and ink may adhere to the leading
edge.
If you have selected 20mm , the test print sheet may not be
printed completely.
Choose how the paper is supplied, Top for printing from the
Tray or Front for printing from the Front Paper Feed Slot .
Choose Yes to restore Med.Detail Set. to the factory default
values.