System Setup - Canon imagePROGRAF iPF5100 User Manual

System Setup

Setting Item
Warning
Keep Media Size
PaperSize Basis
TrimEdge Reload
Nozzle Check
Sleep Timer
Length Unit
Time Zone
Date Format
Buzzer Set the buzzer. Choose On for the buzzer to sound in case
of errors.
Detect Mismatch Choose Warning for notication (display of a warning
message) during printing if the paper type specied in
the printer menu does not match the paper type in the
printer driver. Choose None to continue to print without
notication. Choose Pause to have printing paused under
these circumstances. In this case, you can continue printing
by pressing the Online button.
Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of the
printer driver if the latter is smaller, which may prevent text or
images in the margin from being printed. Choose Off to use
the printer driver settings instead. Even if the margin setting
of the printer driver is smaller than that of the printer menu,
text or images will not be cut off. However, this requires
longer paper because the actual margin will be equal to the
margin setting of the printer driver plus the margin setting of
the printer menu.
Sht Selection If sheet size detection is activated, choose whether ISO
A3+ or ANSI B Super is applied when an inbetween size is
detected.
Roll Selection1 If roll size detection is activated, choose whether ISO A3
(297mm) and 300mm Roll is applied when an inbetween
size is detected.
Roll Selection2 If roll size detection is activated, choose whether 10in.
(254mm) or JIS B4 (257mm) is applied when an in between
size is detected.
Keeping a roll in the printer for a long time without printing on
it may leave a depression on the leading edge.
When printing quality is most important, we recommend
setting this option to On so that the paper edge is
automatically cut before printing.
Specify the timing for automatic checks of nozzle clogging.
Choose Off to disable checking. Choose 5 pages to check
after every 5 pages are printed. Choose 10 pages to check
once after every ten pages are printed.
Specify the period before the printer enters sleep mode.
Choose the unit of measurement when roll length is displayed.
You can switch the unit displayed for Roll Length Set and the
remaining paper amount displayed in the submenu.
Specify the time zone. Time zone options indicate a main city
in this time zone and the difference from Greenwich Mean
Time.
Specify the date format.
Description, Instructions
Control Panel
Printer Parts 55