Table of Contents
Advertisement
Operator Panel Component Locations
The following illustration shows the component location on the operator panel.
Number
Component Name
1
Operator Panel Display
2
Attention LED
3
System Reset Button
4
Power LED
5
Power-On Button
6
Power-On Button Guard
7
Service Processor Reset Switch
(Pinhole)
8
Serial Number Label
Component Description
Displays current status of system startup, or diagnostic
information in the event of a hardware problem.
Normal State - LED is off
Resets the system
Blinking - When connected to the power source (System is in
standby mode).
Solid - When power-on button has been pressed.
Note: There is approximately a 30-second transition period
from the time the power-on button is pressed to when the
power LED goes from blinking to on solid. During the transition
period, you may observe the blinking intervals speed up.
Turns the system power on and off.
Prevents accidental power-on and power-off operations.
Service Personnel Use
Displays the system serial number
Chapter 1. Reference Information
15
Advertisement
Table of Contents
