Table of Contents
Advertisement
Table 6. Service Processor Error Codes. (continued)
Error Code Description
4503 30D3 Description: 1 GB DIMM fault
Action: This error code indicates that the memory repeat gard function has deconfigured a quad of
memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the system information
menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of manually deconfigured,
reconfigure the DIMMs and boot the system to the SMS menus. Power off the system using the
white power button and look again at the status of the DIMMs. If all of the processors are still
configured in the processor configuration/deconfiguration menu, the problem has been resolved.
If all of the DIMMs are still configured in the memory configuration/deconfiguration menu, the
problem has been resolved.
If any of the DIMMs have a status of deconfigured by the system, either before or after the boot
to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location code. The entire
quad of memory must be replaced.
4503 30D4 Description: 1 GB DIMM fault
Action: This error code indicates that the memory repeat gard function has deconfigured a quad of
memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the system information
menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of manually deconfigured,
reconfigure the DIMMs and boot the system to the SMS menus. Power off the system using the
white power button and look again at the status of the DIMMs. If all of the processors are still
configured in the processor configuration/deconfiguration menu, the problem has been resolved.
If all of the DIMMs are still configured in the memory configuration/deconfiguration menu, the
problem has been resolved.
If any of the DIMMs have a status of deconfigured by the system, either before or after the boot
to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location code. The entire
quad of memory must be replaced.
4503 30D5 Description: 2 GB DIMM fault
Action: This error code indicates that the memory repeat gard function has deconfigured a quad of
memory. Do the following:
1. Go to the memory configuration/deconfiguration menu, located under the system information
menu in the service processor menus.
Look at the status of the DIMMs. If any of the DIMMs have a status of manually deconfigured,
reconfigure the DIMMs and boot the system to the SMS menus. Power off the system using the
white power button and look again at the status of the DIMMs. If all of the processors are still
configured in the processor configuration/deconfiguration menu, the problem has been resolved.
If all of the DIMMs are still configured in the memory configuration/deconfiguration menu, the
problem has been resolved.
If any of the DIMMs have a status of deconfigured by the system, either before or after the boot
to the SMS menus, go to step 2.
2. Replace the quad of memory containing the DIMM specified by the location code. The entire
quad of memory must be replaced.
450x 26F4 System backplane with 1 processor fault
450x 26F5 System backplane with 2 processors fault
168
IntelliStation POWER 9114 Model 275 Service Guide
Action/
Possible Failing FRU
Replace the system unit backplane
Location: U0.1-P1
Replace the system unit backplane
Location: U0.1-P1
Advertisement
Table of Contents
