Table of Contents
Advertisement
Table 2. Firmware Checkpoints (continued)
Checkpoint
E1F2
E1F3
E1F4
E1F5
E1F6
E1F7
E1F8
E1F9
E1FA
E1FB
E1FC
Description
Power-on password prompt
Privileged-access password prompt
End self-test sequence on boot devices;
begin SMS.
Build boot device list
Determine boot device sequence
No boot image located
Building boot device list for SCSI adapters.
(The location of the SCSI adapter being
scanned is also displayed.)
Building boot device list for fibre-channel
adapters. (The location of the SAN adapter
being scanned is also displayed.)
Building boot device list for SCSI adapters.
(The device ID and the device LUN being
scanned are also displayed.)
Scan SCSI bus for attached device8
Building boot device list for SSA adapters.
(The location code of the SSA adapter
being scanned is also displayed.)
Action/
Possible Failing FRU
The prompt should be visible on the
firmware console .
If a console is attached but nothing is
displayed on it, go to the "Quick Entry
MAP" on page 43 with the symptom "All
display problems."
The prompt should be visible on the
firmware console (may be a VTERM on the
HMC).
If a console is attached but nothing is
displayed on it, go to the "Quick Entry
MAP" on page 43 with the symptom "All
display problems."
Go to "MAP 1540: Problem Isolation
Procedures" on page 87.
Go to "MAP 1540: Problem Isolation
Procedures" on page 87.
Go to "MAP 1540: Problem Isolation
Procedures" on page 87.
Go to "Boot Problems/Concerns" on page
128..
1. If a location code is available, follow the
Repair actions listed for error code
21A0 00XX.
2. If no location code is available, go to
"MAP 1540: Problem Isolation
Procedures" on page 87.
1. If a location code is available, follow the
Repair actions listed for error code
21A0 00XX.
2. If no location code is available, go to
"MAP 1540: Problem Isolation
Procedures" on page 87.
Go to "MAP 1540: Problem Isolation
Procedures" on page 87.
1. If a location code is available, follow the
Repair actions listed for error code
21A0 00XX.
2. If no location code is available, go to
"MAP 1540: Problem Isolation
Procedures" on page 87.
Go to "MAP 1548: System Processor
Problem Isolation" on page 90.
Chapter 4. Checkpoints
119
Advertisement
Table of Contents
