14. Lower the tab onto the PCI adapter faceplate. Rotate the adapter locking latch clockwise until it
covers the tab at approximately a 45-degree angle. See the following illustration.
1 System Unit
2 Adapter Retainer Assembly (in the unlocked
position)
3 Adapter Retainer Assembly (retainer seat
down and the locking latch in the unlocked
position)
15. Connect the adapter cables.
16. Replace the service access cover as described in "Replacing the Service Access Cover" on page
249..
17. Reconnect the power source to the system.
18. Return the system to the operating position as described in "Placing the Model 275 into the Service
and Operating Position" on page 248.
19. Start the system as described in "Starting the System" on page 247.
256
IntelliStation POWER 9114 Model 275 Service Guide
3
2
1
4
5
4 Adapter Retainer Assembly (retainer seat
down and the locking latch in the locked
position)
5 PCI adapter faceplate (dotted lines)