Lines - Brother BAS-311E Instruction Manual

Lines

Programming
1. Press .
P
2. Select with
3. Move the work clamp with
when the needle point is at point A of the
pattern.
4. Select with
5. Input the stitch length and press
6. Move the work clamp with
when the needle point is at point B of the
pattern.
7. Repeat step 6 and create the program to
point E.
8. When point E is programmed, press
twice.
The pattern with lines is programmed.
The example in the left is used for explanation of
programming.
and press .
. Press
and press .
.
. Press
Programmer
Chapter 2 Programming with Help Function
ESC ESC
29