Chapter 2 Programming with Help Function
Programming example
Frequently used programming method is explained here. Refer to "Programming" (page 58) for function
and operation of each icon.
Programming for each stitch
1
Programming
1. Press
.
P
The work clamp comes down and the programmer screen is
displayed.
2. Select
with
3. Move the needle with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Select
with
5. Move the needle with
when the needle point is at point B of the
pattern.
6. Repeat step 5 and create the program to
point C.
22
Program each stitch according to the pattern. The
example in the left is used for explanation.
, then press
.
. Press
, then press
. Press
Programmer
.