Reading Extended Option Output Data From A Cf Card - Brother BAS-326G Service Manual

4
5
End data read/write mode

3-15. Reading extended option output data from a CF card

1
2
3
Writing
TEST indicator switches off
Loading
BAS-311G, BAS-326G
Press the R/W key.
• The buzzer will sound and the selected sewing data
will be copied from the internal memory onto the floppy
disk.
• The program numbers that have been written will
appear in the menu display.
* If there is a large volume of data in the internal
memory, it will take some time for all of it to be written.
To halt the writing of data, press the STOP switch. If
you then press the RESET key, the display will change
back to [ ALL].
Press the TEST key.
Turn off the power and remove the floppy disk.
Select the [r 11] data read/write mode.
Press the R/W key.
• The buzzer will sound and the extended option output
data will be loaded from the CF card and copied into
the sewing machine's internal memory.
When [ End] is displayed, the process is complete.
Turn off the power switch, remove the CF card, and then
close the cover of the CF slot.
3. READING / WRITING DATA
5065Q
5066Q
4498Q
4581Q
33