Setting The Option Output; Ending Programming - Brother BAS-311E Instruction Manual

Setting the option output

This is set to flip/flop the option output.
Command to be used
7 7 1 L
7 7 2 L
7 7 3 L
7 7 0 L
1. Move the needle to the desired position.
2. Input the command for option output.

Ending programming

When programming is completed, input an end code.
Command to be used
1 1 1 E
1 1 2 E
1 1 3 E
1 1 4 E
1 1 5 E
1 0 E
1
1. When the data is created, input the end code.
Data after the end code is input is deleted.
Chapter 3 Programming with Command Function
Flipping/flopping option output 1
Flipping/flopping option output 2
Flipping/flopping option output 3
Canceling option output setting
Normal end
Fixing the sewing speed at 1000 spm or lower.
Not carrying out thread removal.
Setting the sewing speed at 1000 spm or lower without
thread removal.
Carrying out no thread breakage.
Fixing the sewing speed at 1500 spm or lower.
Programmer 179