Copying A Pattern Rotated Clockwise (Counterclockwise) - Brother BAS-311E Instruction Manual

Copying a pattern rotated clockwise (counterclockwise)

Command to be used
6 7 6 M
6 7 7 M
This function is available only when the needle is at the home position.
Values of 1 - 359 degrees are available for input.
The copied data is linked to the original data with a split data.
1. Make sure that the needle is at the home position.
Press R if the needle is not at the home position.
2. Determine the center point for rotation with
3. Input
6 7 6
4. Input the angle in 3 digits and press
Copying a pattern rotated clockwise
Copying a pattern rotated counterclockwise
or .
6 7 7 M
M
Programmer
Chapter 3 Programming with Command Function
.
.
L
183