3. When the needle point reaches 1, press
The work clamp stops. If the work clamp passes, input a few
stitches and press
. The needle returns for a few stitches of
the input.
4. Press
.
ESC
ESC
Moving in parallel
1. Select
with
2. Select
with
3. Move the work clamp with
when the needle point is at 2.
Move 3 to 4 in the similar manner.
4. Press
three times.
ESC
ESC
Saving
1. Select
with
2. Select
with
3. Input the data number and press
4. Press
.
ESC
ESC
and press
.
and press
.
. Press
and press
.
and press
.
.
Chapter 2 Programming with Help Function
.
79