Carrying Out Double Stitch - Brother BAS-311E Instruction Manual

Carrying out double stitch

The following six options are available for double stitch.
Creating double stitch data in the reverse direction to the left side of the sewing path
Creating double stitch data in the reverse direction to the right side of the sewing path
Creating double stitch data in the same direction to the left side of the sewing path
Creating double stitch data in the same direction to the right side of the sewing path
Offsetting double stitch data to the left side of the sewing path
Offsetting double stitch data to the right side of the sewing path
If sharp angles or fine curves are included in the pattern sheet, the desired double stitch may
not be achieved.
1. Select and press
2. Select the type of double stitch and press
3. Input the stitch length and the double stitch width, then press
Stitch length
4. Move the needle with
Press twice to change the direction of sewing.
.
, then press
Remaining plot count
Distance from the previous point in the
direction of X or Y axis
Programmer
Chapter 2 Programming with Help Function
.
Double stitch width
Press for selection.
.
.
95