Brother BAS-311E Instruction Manual page 82

6. Select with
7. Move the work clamp with
when the needle point is at given point
C.
8. Press .
ESC ESC
Inputting the end code
1. Select with
2. Select the end code type with
press .
"111" is selected in the example. Press
returns to the first stitch (point A).
3. Press .
ESC ESC
The work clamp returns to the home position.
Saving
1. Select with
2. Select with
3. Input the data number and press
and press .
. Press
and press .
and
and the work clamp
and press .
and press .
.
Chapter 2 Programming with Help Function
81