Creating A Zigzag Circle - Brother BAS-311E Instruction Manual

Chapter 2 Programming with Help Function
The following five options are available for creating a zigzag circle.
1.
2.
If
1.
2.
88

Creating a zigzag circle

Creating a zigzag circle by specifying 3 points on the circumference
Creating a zigzag circle of the specified diameter in the clockwise direction
Creating a zigzag circle of the specified diameter in the counterclockwise direction
Creating a zigzag circle of the specified radius in the clockwise direction
Creating a zigzag circle of the specified radius in the counterclockwise direction
Select and press
Select an option of creating a zigzag circle, then press
is selected
Input the zigzag stitch width, stitch length and the overlap stitch count,
then press .
Values of 0 - 9 are available for input.
Zigzag width
Move the neelde with
.
Zigzag pitch
Stitch count for overlap sewing
Press
to select the second point and press
Remaining plot count
Distance from the previous point in
the direction of X or Y axis
Programmer
.
for selection.
.