Editing Data; Moving Symmetrically To The Y Axis; Moving Symmetrically To The X Axis - Brother BAS-311E Instruction Manual

Chapter 3 Programming with Command Function

Editing data

Command to be used
This function is available only when the needle is at the home position.
1.
2.
3.
Command to be used
This function is available only when the needle is at the home position.
1.
2.
180

Moving symmetrically to the Y axis

0 0 1 M
Make sure that the needle is at the home position.
Press if the needle is not at the home position.
R
Input
0 0 1 M
Press .
L

Moving symmetrically to the X axis

0 1 0 M
Make sure that the needle is at the home position.
Press if the needle is not at the home position.
R
Input
0 1 0 M
Moving symmetrically to the Y axis passing the start point of
sewing
.
Moving symmetrically to the X axis passing the start point of
sewing
.
Programmer