Brother BAS-311E Instruction Manual page 40

3. Move the work clamp with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Select with
5. Move the work clamp with
when the needle point is at point B of the
pattern.
6. Repeat step 5 and create the program to
point C.
7. When point C is programmed, press
8. Select with
9. Move the work clamp with
when the needle point is at point D of the
pattern.
10. Repeat step 9 and create the program to
point F.
11. Press .
ESC ESC
12. Select with
13. Create the program to point H.
14. When point H is programmed, press
. Press
and press .
. Press
.
ESC ESC
and press .
. Press
and press .
.
ESC ESC
Programmer
Chapter 2 Programming with Help Function
39