Display Screen; Programming Flowchart - Brother BAS-311E Instruction Manual

Display screen

Press and the following screen appears.
P
If the screen is not displayed, press
Displays the command
status.
Displays the current
needle position/total
stitch count.

Programming flowchart

Programming
Position the sewing start position and press
Input the command for programming.
(Refer to page 161.)
Combine straight lines, curves and other figures to make patterns to the pattern
sheet. After completing each pattern, press
The data is available until deletion.
Input end code.
(Refer to page 179.)
Chaprter 3 Programming with Command Function
.
?
Displays distance from the home position.
Displays the stitch length.
Displays the input value.
.
L
Programmer
Displays distance from the
previous needle position.
Displays the end code, if
applicable.
.
L
119