Curve - Brother BAS-311E Instruction Manual

Chapter 3 Programming with Command Function
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
Ending program
1. Press .
P

Curve

Be sure to press
8
7
When a split is made
More intermediate points such as points B, D, F or G will create smooth curves.
Programming
1. Press .
P
The work clamp moves to the home position and the
programmer screen is displayed.
2. Move the work clamp with
when the needle point is at point A of the
L
pattern.
The first stitch (point A) is programmed.
128
for a split at corner points C or E. If a split is not made, the corner will be round.
9 L
A pattern with curves is programmed.
When a split is not made
. Press
Programmer