Canceling Thread Breakage At The Last Stitch - Brother BAS-311E Instruction Manual

Chapter 2 Programming with Help Function
Ending program
1. Press .
P

Canceling thread breakage at the last stitch

When "115" is input for the end code, the thread breakage does not occur. In this case, every thread breakage
including emergency stop is canceled. Carry out the following setting for canceling thread breakage at the speci-
fied point.
Programming
1. Create the program 1 stitch (A) before the
desired end point.
2. Press .
ESC ESC
The number of pressing varies depending on the programming
method.
3. Select with
4. Move the work clamp with
stitch length. Press
point is at point B of the pattern.
Point B is programmed.
5. Press .
ESC ESC
80
Addition of feed after the last point can cancel thread
breakage at the last stitch.
Stitch
length
and press
for the
when the needle
Programmer
.