Splitting - Brother BAS-311E Instruction Manual

Programmer instruction manual - english
Hide thumbs Also See for BAS-311E:
Table of Contents

Advertisement

Chapter 3 Programming with Command Function

Splitting

Pattern 1
Pattern 2
Programming
1. Press
.
P
The work clamp moves to the home position and the
programmer screen is displayed.
2. Move the work clamp with
when the needle point is at point A of the
L
pattern.
The first stitch (point A) is programmed.
3. Program pattern 1.
4. Input point B and press
5. Move the work clamp with
6
6
6
L
point C of the pattern.
To change the pattern, press the pressure holder lift switch and
replace the pattern.
6. Program patterns 2 and 3.
Inputting the end code
1. Press
L
1
1
1
E
The work clamp returns to the start position.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
136
.
F
when the needle point is at
at the last stitch and press
.
Different patterns, splitting each pattern in sequence,
are programmed. The example in the left is used for
explanation of 3 patterns in sequence.
. Press
. Press
Programmer
Pattern 1
Pattern 2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents