4. The needle point moves to B.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
Ending program
1. Press
.
P
Deleting the escape point
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
Moving to position A.
1. Press
and press
1
The work clamp moves to the escape point.
The escape point is deleted. The example in the left
is used for explanation of deleting A.
.
Programmer
Chaprter 3 Programming with Command Function
153