Repeated Copying - Brother BAS-311E Instruction Manual

Chapter 3 Programming with Command Function
5.
6.
Command to be used
1.
2.
186
Input the magnification in 3 digits in the Y direction and press
Magnification values of 0 - 400 are available for input.
Input the stitch length in 3 digits and press
If the value is "000", the stitch count remains unchanged. The stitch length increases or decreases.

Repeated copying

3 3 3 L
Move the needle to the desired position.
Input
3 3 3 L
The needle follows the copied data. Press
Copying data from the sewing start position or the feed point
(excluding the number of feed boundaries to be ignored) to the
current needle position for the area after the current needle
position
.
to cancel halfway.
Programmer
M
.
L
.