Zigzag Stitch - Brother BAS-311E Instruction Manual

Ending program
1. Press .
P

Zigzag stitch

Zigzag width
Stitch
length
Zigzag with curves may be programmed.
Programming
1. Press .
P
The work clamp moves to the home position and the
programmer screen is displayed.
2. Move the work clamp with
when the needle point is at point A of the
L
pattern.
The first stitch (point A) is programmed.
3. Press
7 3
is the command for the zigzag stitch. Input the
7
width of the zigzag stitch in
example.
4. Input the stitch length and press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
5. Move the work clamp with
7 8 9 L
point B of the pattern.
Zigzag stitch with even width to the left and the right is
programmed.
and press .
M
0
. 3.0 mm is input in the
when the needle point is at
Chaprter 3 Programming with Command Function
Zigzag stitch is programmed. The example in the left
is used for explanation of even width of zigzag stitch
on the sewing path.
. Press
.
M
. Press
Programmer 137