Double Stitch - Brother BAS-311E Instruction Manual

Chapter 3 Programming with Command Function
Ending program
1. Press .
P

Double stitch

Sewing
width
When the line changes from straight to curve or curve to straight as in points B or E, be sure to press
to make a split.
More intermediate points such as points C or D will create smooth curves.
Programming
1. Press .
P
The work clamp moves to the home position and the
programmer screen is displayed.
2. Move the work clamp with
when the needle point is at point A of the
L
pattern.
The first stitch (point A) is programmed.
3. Press
2 3
is the command for the double stitch. Input the
2
width of the double stitch in
example.
4. Input the stitch length and press
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
5. Create the program to point F in the similar
manner of curve program.
If a straight line is present as in the example, press
7 8 9 L
130
and press .
M
0
. 3.0 mm is input in the
at the end of the line.
A double stitch is programmed to make two lines
with a constant width.
The example in the left is used for explanation of a
double stitch to the left of sewing direction.
. Press
.
M
Programmer
7 8 9 L