Example Of Modified Program; Resizing Pattern - Brother BAS-311E Instruction Manual

Chapter 3 Programming with Command Function

Example of modified program

This section describes the modification method of the program using examples. Refer to "Programming"
(page 161) .

Resizing pattern

The center point (reference point) of resizing can be changed. The magnifying direction varies depending on the
position of the reference point.
If the reference point is not determined, the pattern is resized to the home position.
If the reference point is determined, the pattern is resized to the reference point.
Reference point
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
142
Reference point
(Home position)
The programmed pattern is resized. The example in
the left is used for explanation.
Programmer