Brother BAS-311E Instruction Manual page 52

10. Program the following points up to point #4
in the same manner.
When programming, be sure that the points and splits specified
on the inside line are paired with those on the outside line
respectively.
If there are any points or splits not paired, the needle point
automatically returns to the previous point. Correct the program.
11. Press .
12. Press .
ESC ESC
Inputting the end code
1. Select with
2. Select the end code type with
press .
"111" is selected in the example. Press
returns to the first stitch(point A).
3. Press .
ESC ESC
The work clamp returns to the home position.
Saving
1. Select with
2. Select with
3. Input the data number and press
4. Press .
ESC ESC
Ending program
1. Press .
P
and press .
and
and the work clamp
and press .
and press .
.
Programmer
Chapter 2 Programming with Help Function
51