Brother BAS-311E Instruction Manual page 61

Chapter 2 Programming with Help Function
3. Select with
4. Input the data number and press
5. Press .
ESC ESC
Moving to position 1
1. Select with
2. Press and press
1
The work clamp moves to the start position.
3. Press .
ESC ESC
Programming a new point
1. Select with
2. Move the work clamp with
when the needle point is at 1'.
1' is programmed.
3. Press .
ESC ESC
Deleting 1
1. Select with
2. Press and press
1
The work clamp moves to the sewing start position.
60
and press .
.
and press .
.
and press .
. Press
and press .
.
Programmer