Checking The Program Setting And Setting Attribute - Brother BAS-311E Instruction Manual

Checking the program setting and
setting attribute

Checking the program setting and setting attribute

The following items are displayed.
Attribute of items marked with * are available for setting.
1.
End code
Current needle position/Total stitch count
Distance from the previous position in the X and Y axial directions
Stitch data type and availability of the option output,
low-speed sewing(*)
Feed data type and availability of the option output,
with/without thread
Needle stop position of the split data (*)
Extended option output no. of the trigger data and
with/without machine stoppage (*)
An example of stitch data is shown below.
Option output
Stitch data type
present/absent
Select or and press
Slow conversion
End code
.
Selecting from the main menu
Programmer
Chapter 2 Programming with Help Function
Displayed at points where stitch is set.
Displayed at points where feed data
is set.
Displayed at points where split data is set.
Displayed at points where trigger is set.
Current stitch count
Total stitch count
Distance from the previous point in
the direction of X or Y axis
107