Brother BAS-311E Instruction Manual page 157

Chapter 3 Programming with Command Function
2. Move the work clamp with
the needle point is at B of the pattern.
Record the coordinates (values of
If the moving distance is long, press
3. Press .
R
The work clamp moves to the home position.
4. Press and press
1
The needle point moves to point C.
5. Move the work clamp with
coordinates recorded in step 2.
The moved point is now D.
If the moving distance is long, press
6. Turn the pulley with a hand and put a
marking with the needle to indicate the
position of point D.
7. Turn the pulley with a hand and move the
needle to the top point.
8. Press .
R
The work clamp returns to the home position.
9. Move the work clamp with
when the needle point is at D of the
L
pattern.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
Ending program
1. Press .
P
156
so that
and ).
before movement.
F
.
for the
before movement.
F
. Press
Programmer