Brother BAS-311E Instruction Manual page 36

7. Move the work clamp with
twice when the needle point is at point B
of the pattern.
8. Program points C, D and E.
9. When point E is programmed, press
again.
10. Program point F.
11. When point F is programmed, press
again.
12. Press .
The needle moves to points F, G and H.
13. When the needle stops, press
times.
Inputting the end code
1. Select with
2. Select the end code type with
press .
"111" is selected in the example. Press
returns to the first stitch(point A).
3. Press .
ESC ESC
The work clamp returns to the home position.
. Press
three
ESC ESC
and press .
and
and the work clamp
Programmer
Chapter 2 Programming with Help Function
35