Brother BAS-311E Instruction Manual page 38

3. Move the work clamp with
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Program pattern 1.
5. Press after input of point B.
ESC ESC
The number of pressing
method for pattern 1.
When is used for programming, press twice.
When each stitch is programmed, press once.
6. Select with
7. Move the work clamp with
when the needle point is at point C of the
pattern.
8. Press .
ESC ESC
9. Program pattern 2.
10. When point D is programmed, press
The number of pressing
method for pattern 1.
When is used for programming, press twice.
When each stitch is programmed, press once.
Inputting the end code
1. Select with
2. Select the end code type with
press .
"111" is selected in the example. Press
returns to the first stitch(point A).
3. Press .
ESC ESC
The work clamp returns to the home position.
. Press
depends on the programming
ESC ESC
and press
. Press
ESC ESC
depends on the programming
ESC ESC
and press
and the work clamp
Programmer
Chapter 2 Programming with Help Function
.
.
.
and
Pattern 1
Pattern 2
37