Changing The First Stitch Position - Brother BAS-311E Instruction Manual

Changing the first stitch position

Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
Moving to position 1.
1. Press and press
1
The work clamp moves to the start position.
Programming a new point.
1. Move the work clamp with
when the needle point is at 1' of the
L
pattern.
1' is programmed.
Deleting 1
1. Press and press
1
The needle point returns to the first stitch.
2. Press .
C
3. Input the number of stitches to be deleted
and press
The example is deleting 1 stitch. Press
.
.
.
1
Chaprter 3 Programming with Command Function
The position of the sewing start position is changed.
The example in the left is used for explanation of
moving the sewing start position from 1 to 1'.
. Press
.
Programmer 147