Installing A Hot Swap Hard Drive Cage With A Sas/Sata Backplane; Figure 76. Removing Fixed Drive Cage Emi Shield From Chassis (Dp/Ws/Brp Configuration Shown) - Intel SC5650-DP Service Manual

Hot Swap Drive Cage Upgrade Install Instructions (optional)

Installing a Hot Swap Hard Drive Cage with a SAS/SATA Backplane

1. Observe the safety and ESD precautions listed in
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see
4. Remove the front bezel assembly. For instructions, see
Assembly".
5. Loosen the thumb screw and remove the fixed drive cage EMI shield.
Figure 76. Removing Fixed Drive Cage EMI Shield from Chassis (DP/WS/
6. Disconnect cables from any fixed hard drives and remove hard drives from the fixed
hard drive cage. For instructions on removing fixed hard drives, see
Fixed Hard
62
BRP configuration shown)
Drive".
®
Intel
Appendix A, "Safety
"Removing the Left Side
"Removing the Front Bezel
A
B
Server Chassis SC5650-DP/WS/BRP/UP Service Guide
Information".
Cover".
TP01869
"Removing a