Exporting Reports - Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - MANAGING VULNERABILITY ASSESSMENT V1 Manual

12 M 360 S
ANAGING IP
Step 3
Step 4
Step 5
Step 6

Exporting Reports

Step 1
Step 2
Step 3
Step 4
CANNERS
Select the scanner you wish to delete.
Click Delete.
A confirmation window appears.
Click Ok.
From the STRM Administration Console menu, select Configurations > Deploy
Configuration Changes.
For the VIS to retrieve reports that are exported from the ip360 device, you must
configure the automated export of reports on the ip360 device.
To configure automated export of reports:
Log in to the IP360 VNE Manager UI.
Select Administer -> System -> VNE Manager -> Automated Export from the
left-hand navigation area.
The Automated Export menu appears.
From the Automated Export menu, click the Export to File tab.
Click the Help link at the top right-hand corner of the menu.
The help that appears provides a link to instructions for configuring automated
exports of reports using ssh. To integrate with STRM, the export must be
configured to use the XML2 format.
Managing Vulnerability Assessment