HEIDENHAIN ITNC 530 - 6-2010 DIN-ISO PROGRAMMING User Manual page 579

3-D touch probes
Radius measurement with the TT 130 touch
probe: Probing direction
Probing feed rate for second measurement
with TT 130, stylus shape, corrections in
TOOL.T
Maximum permissible measuring error
with TT 130 during measurement with
rotating tool
Required for calculating the probing feed rate in
connection with MP6570
Feed rate for probing a stationary tool with
the TT 130
Radius measurement with the TT 130:
Distance from lower edge of tool to upper
edge of stylus
Set-up clearance in the tool axis above the
stylus of the TT 130 for pre-positioning
Clearance zone in the machining plane
around the stylus of the TT 130 for pre-
positioning
Rapid traverse for TT 130 in the probe cycle
M function for spindle orientation during
individual tooth measurement
Measuring rotating tools: Permissible
rotational speed at the circumference of the
milling tool
Required for calculating rpm and probe feed
rate
Measuring rotating tools: Permissible
rotational rpm
HEIDENHAIN iTNC 530
MP6505.0 (traverse range 1) to 6505.2 (traverse range 3)
Positive probing direction in the angle reference axis (0° axis): 0
Positive probing direction in the +90° axis: 1
Negative probing direction in the angle reference axis (0° axis): 2
Negative probing direction in the +90° axis: 3
MP6507
Calculate feed rate for second measurement with TT 130,
with constant tolerance: Bit 0 = 0
Calculate feed rate for second measurement with TT 130,
with variable tolerance: Bit 0 = 1
Constant feed rate for second measurement with TT 130: Bit 1 = 1
MP6510.0
0.001 to 0.999 [mm] (recommended input value: 0.005 mm)
MP6510.1
0.001 to 0.999 [mm] (recommended input value: 0.01 mm)
MP6520
1 to 3 000 [mm/min]
MP6530.0 (traverse range 1) to MP6530.2 (traverse range 3)
0.001 to 99.9999 [mm]
MP6540.0
0.001 to 30 000.000 [mm]
MP6540.1
0.001 to 30 000.000 [mm]
MP6550
10 to 10 000 [mm/min]
MP6560
0 to 999
–1: Function inactive
MP6570
1.000 to 120.000 [m/min]
MP6572
0.000 to 1000.000 [rpm]
If you enter 0, the speed is limited to 1000 rpm
579