HEIDENHAIN ITNC 530 - 6-2010 DIN-ISO PROGRAMMING User Manual page 548

General network settings
U Press the DEFINE NET soft key to enter the general network
settings. The Computer name tab is active:
Setting Meaning
Name of the Ethernet interface to be integrated
Primary
in your company network. Only active if a
interface
second, optional Ethernet interface is available
on the control hardware
Computer name Name displayed for the TNC in your company
network
Host file Only required for special applications: Name
of a file in which the assignments of IP
addresses to computer names is defined
U
Select the Interfaces tab to enter the interface settings:
Setting Meaning
Interface list List of the active Ethernet interfaces. Select one
of the listed interfaces (via mouse or arrow
keys)
Activate button:
Activate the selected interface (an X appears
in the Active column)
Deactivate button:
Deactivate the selected interface (a hyphen
(-) appears in the Active column)
Configuration button:
Open the Configuration menu
Allow IP This function must be kept deactivated.
forwarding Only activate this function if external access via
the second, optional Ethernet interface of the
TNC is necessary for diagnostic purposes. Only
do so after instruction by our Service
department
548 MOD Functions